Wood Turning Library
 Review
of the Serious Toolworks Lathe
by Joseph M. Herrmann
Read what an independent reviewer has to say about the Serious
Toolworks SL2542 wood lathe. The review is from the summer 2010
edition of Woodturning Design.
Joseph Herrmann takes a four hour drive to Ligonier, Pennsylvania
to visit SL2542 lathe owner John McCain, Jr. After describing what
was done to try out the SL2542 the review concludes by saying "I
wouldn’t hesitate to recommend it to anyone who is looking
for a large, robust lathe on which to do some SERIOUS turning."
This review is a PDF of the actual magazine pages, so you'll see
the full review exactly as it was published.
Go to: Review
Of The Serious Toolworks Lathe
 Online
Article:
Turning a Madrone Burl Bowl
by Dale Larson
This
article is used by the permission of Dale Larson and “Woodturning
Design" magazine. The article was first published by “Woodturning
Design" in August of 2004.
Madrone can be a difficult wood to work with.
Dale describes the step-by-step details showing you how to turn
a madrone bowl.
Go to: Turning
a Madrone Burl Bowl
|
